Removal

ENGINE HOOD / DOOR: LUGGAGE DOOR HINGE TORSION BAR: REMOVAL

REMOVAL

HINT:
- The installation procedures are the removal procedures in reverse order. However, only installation procedures requiring additional information are included.
- Use the same procedures for the RH side and LH side.
- Since the removal of the torsion bar will cause no tension, operation of opening and closing the door should be carried out holding the door by hand in order to prevent the door from dosing without any resistance.
- RH side torsion bar is in the upper side and LH side torsion bar is in the lower side, thus the installation should be done in the order of RH to LH, and the removal should be done in the order of LH to RH.

1. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH
(a) Remove the torsion bars from the center bracket.





(b) Install SST to the torsion bar on the hinge side
SST: 09804-24010





(c) Push down the SST, and pull the luggage compartment door hinge from the torsion bar.
(d) Slowly lift the SST, and remove the torsion bar from the torsion bar bracket with SST.





(e) Disconnect the torsion bar from the bracket.