Installation

2AZ-FXE EMISSION CONTROL: FUEL TANK PRESSURE SENSOR:

INSTALLATION

1. INSTALL VAPOR PRESSURE SENSOR ASSEMBLY






(a) Install the vapor pressure sensor assembly with the tube joint clip and cover.
- Check that there are no scratches or foreign objects on the connecting part.
- Check that the vapor pressure sensor assembly is inserted securely.
- Check that the tube joint clip is on the collar of the vapor pressure sensor assembly.
- After installing the tube joint clip, check that the fuel tube joint is pulled off.





(b) Connect the connector.
2. INSTALL REAR FLOOR SERVICE HOLE COVER Installation

3. INSTALL REAR SEAT CUSHION ASSEMBLY

4. INSTALL FUEL TANK CAP ASSEMBLY Installation