Removal

2GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected
Repair Instruction - Initialization.

2. REMOVE V-RIBBED BELT Removal

3. REMOVE GENERATOR ASSEMBLY

4. DISCONNECT COOLER COMPRESSOR ASSEMBLY Removal

5. REMOVE CRANKSHAFT POSITION SENSOR






(a) Disconnect the crankshaft position sensor connector.
(b) Remove the bolt and crankshaft position sensor.