Removal

BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: REMOVAL

REMOVAL
NOTICE:
- Do not use dropped or damaged yaw rate sensors.
- Prevent foreign matter from attaching between the yaw rate sensor bracket and body.
- Confirm that the sensor direction is correct.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.

2. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY Removal

3. REMOVE CONSOLE BOX ASSEMBLY Removal

4. REMOVE YAW RATE SENSOR






(a) Disconnect the yaw rate sensor connector.
(b) Remove the 2 bolts and yaw rate sensor.