Disassembly

AIR CONDITIONING: BLOWER UNIT: DISASSEMBLY

DISASSEMBLY

1. REMOVE EVAPORATOR TEMPERATURE SENSOR






(a) Remove the clamp and evaporator temperature sensor.
2. REMOVE COOLER EXPANSION VALVE






(a) Using a hexagon wrench 4 mm, remove the 2 hexagon bolts and cooler expansion valve.
3. REMOVE COOLER EVAPORATOR SUB-ASSEMBLY NO.1






(a) Remove the cooler evaporator sub-assembly No.1.






(b) Remove the 2 O-rings from the cooler evaporator sub-assembly No.1.
4. REMOVE AIR FILTER COVER PLATE






(a) Release the 2 claws and remove the air filter cover plate.
5. REMOVE CLEAN AIR FILTER






(a) Remove the clean air filter.
6. REMOVE AIR INLET SERVO MOTOR






(a) Remove the 3 screws and air inlet servo motor.
7. REMOVE AIR DUCT SUB-ASSEMBLY NO.3






(a) Disengage the 4 claws and then remove the air duct sub-assembly No.3.
8. REMOVE COOLING UNIT MOTOR SUB-ASSEMBLY






(a) Remove the 3 screws and cooling unit motor sub-assembly w/ fan.