Reassembly

SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REASSEMBLY

REASSEMBLY

1. INSTALL OCCUPANT CLASSIFICATION ECU (for Front Passenger Seat) Installation

2. INSTALL SEAT POSITION AIRBAG SENSOR (for Driver Seat) Installation

3. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System)
(a) Set the front seat back heater assembly LH to the separate type front seatback cover.
(b) Install the front seat back heater assembly LH with 17 new tack pins.





NOTICE: Do not substitute other metal parts for tack pins.

4. INSTALL SEPARATE TYPE FRONT SEATBACK COVER






(a) Using hog ring pliers, install the separate type front seatback cover with 11 new hog rings.
NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

5. INSTALL SEATBACK COVER WITH PAD






(a) Install the seatback cover with pad.
(b) Install the separate type front seatback cover bracket with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)






(c) Using hog ring pliers, install the separate type front seatback cover with 2 new hog rings.
NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

(d) Engage the hooks.
6. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)
(a) Set the front seat cushion heater assembly LH to the separate type front seat cushion cover.
(b) Install the front seat cushion heater assembly LH with 34 new tack pins.





NOTICE: Do not substitute other metal parts for tack pins.

7. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER






(a) Using hog ring pliers, install the separate type front seat cushion cover with 11 new hog rings.
NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

8. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH