Installation

EXTERIOR: NAME PLATE: INSTALLATION

INSTALLATION
HINT: When installing a new name plate, heat the vehicle body and name plate using a heat light.

Heating temperature:





NOTICE: Do not heat the vehicle body and name plate excessively.

1. INSTALL BACK DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove any double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new name plate.
(1) Using a heat light, heat the vehicle body and a new name plate.
(2) Remove the release paper from the name plate.
HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate as shown in the illustration.





2. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove any double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new name plate.
(1) Using a heat light, heat the vehicle body and a new name plate.
(2) Remove the release paper from the name plate.
HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate as shown in the illustration.





Standard measurement:






3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove any double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new name plate.
(1) Using a heat light, heat the vehicle body and a new name plate.
(2) Remove the release paper from the name plate.
HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate as shown in the illustration.
for XL plate:





Standard measurement:






for XLS plate:





Standard measurement:






for LIMITED plate:





Standard measurement:






for TOURING plate:





Standard measurement:






4. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
(a) Remove the back-up light assemblies LH and RH.
(b) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove any double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(c) Install a new name plate.
(1) Using a heat light, heat the vehicle body and a new name plate.
(2) Remove the release paper from the name plate.
HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Install the name plate as shown in the illustration.





Standard measurement:






(d) Install the back-up light assemblies LH and RH.