Wiring Harness: Service and Repair

TRANSMISSION WIRE

COMPONENTS (Part 1):

COMPONENTS (Part 2):

REMOVAL
1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY





2. REMOVE TRANSMISSION WIRE
(a) Disconnect the transmission wire connector.
(b) Remove the bolt and transmission wire.

INSTALLATION





1. INSTALL TRANSMISSION WIRE
(a) Coat a O-ring with ATF.
(b) Install the transmission wire and bolt.
Torque: 5.4 Nm (55 kgf/cm, 48 in. lbs.)
(c) Connect the transmission wire connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY