Power Point Socket (For Front Side)

Power Point Socket (for Front Side):

Power Point Socket (for Front Side):

Power Point Socket (For Front Side)

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
3. REMOVE REAR CONSOLE BOX ASSEMBLY




4. REMOVE POWER POINT SOCKET ASSEMBLY
a. Turn the socket in the circumference direction as shown in the illustration, disengage the claw between the socket and the power point socket cover, and push out the socket to the room side.




b. Align the socket with the notch on the power point socket cover, remove the power point socket assembly to the room side.

INSTALLATION

1. INSTALL POWER POINT SOCKET ASSEMBLY
a. Align the socket with the notch on the power point socket cover, push the power point socket assembly into as hard as possible and install it.

2. INSTALL REAR CONSOLE BOX ASSEMBLY
3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)