Steering Angle Sensor: Service and Repair
REMOVAL1. PRECAUTION
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE STEERING PAD
5. REMOVE STEERING WHEEL ASSEMBLY
6. REMOVE STEERING COLUMN COVER
7. REMOVE SPIRAL CABLE
8. REMOVE STEERING ANGLE SENSOR
a. Release the claw and remove the steering angle sensor from the spiral cable.
INSTALLATION
1. INSTALL STEERING ANGLE SENSOR
a. Install the steering angle sensor onto the spiral cable.
2. INSPECT SPIRAL CABLE
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. INSTALL SPIRAL CABLE
5. CENTER SPIRAL CABLE
6. INSTALL STEERING WHEEL ASSEMBLY
7. INSTALL STEERING PAD
8. INSPECT STEERING PAD
9. INSPECT SRS WARNING LIGHT