Accelerator Pedal: Service and Repair
REMOVAL1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE ACCELERATOR PEDAL ASSEMBLY
a. Disconnect the accelerator position sensor connector [A].
b. Remove the 2 bolts [B], then remove the accelerator pedal.
INSTALLATION
1. INSTALL ACCELERATOR PEDAL ASSEMBLY
a. Install the accelerator pedal with the 2 bolts [A].
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
b. Connect the accelerator position sensor connector [B].
2. CONNECT BATTERY NEGATIVE TERMINAL
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)