Pinout Values and Diagnostic Parameters
TERMINALS OF ECUSKID CONTROL ECU (With VSC):
1. TERMINAL DESCRIPTION
2. TERMINAL INSPECTION
(a) Disconnect the connector and measure the voltage on the wire harness side.
HINT: Voltage can not be measured with the connector connected to the skid control ECU as the connector is water resistance.
SKID CONTROL ECU (without VSC):
3. TERMINAL DESCRIPTION
4. TERMINAL INSPECTION
(a) Disconnect the connector and measure the voltage on the wire harness side.
HINT: Voltage can not be measured with the connector connected to the skid control ECU as the connector is water resistance.
