Only Wireless Control Function Is Inoperative
Only Wireless Control Function is InoperativeDESCRIPTION
The door control receiver receives a signal from the transmitter and sends this signal to the integration relay. Then, the integration relay controls door operation by sending a door LOCK/UNLOCK signal to each door lock motor.
Wiring Diagram:
Step 1:
Step 1(continued)-5:
Step 5(continued)-6:
Step 6(continued)-7:
Step 8-10:
Step 11-12:
Step 13-15:
Step 16:
INSPECTION PROCEDURE
HINT: The switch described below transmits signals and is built into the door control transmitter.