Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Vehicle Stability Control System

DTC C0279/12 Short to B+ in ABS Solenoid Relay Circuit

DESCRIPTION

DTC Detecting Condition:




The ABS solenoid relay is built in the ABS and TRACTION actuator assembly. This relay supplies power to each ABS solenoid. If the initial check is OK, after the ignition switch is turned to the ON position, the relay goes on.

Wiring Diagram:






Step 1-2:




Step 3-4:




INSPECTION PROCEDURE

NOTE: When replacing the ABS and TRACTION actuator assembly, perform zero point calibration. Calibration