Speed Sensor

SPEED SENSOR

COMPONENTS (Part 1):

COMPONENTS (Part 2):

REMOVAL
1. REMOVE AIR CLEANER ASSEMBLY WITH HOSE
2. REMOVE NO.1 AIR CLEANER HOSE
3. REMOVE SPEEDOMETER SENSOR
(a) Disconnect the connector.
(b) Remove the bolt and speedometer sensor assembly.





(c) Remove the clip and driven gear from the speedometer sensor.

INSTALLATION





1. INSTALL SPEEDOMETER SENSOR
(a) Coat a O-ring with ATF and install it to the speedometer sensor.
(b) Install the driven gear to the speedometer sensor with the clip.
(c) Install the speedometer sensor assembly with the bolt.
Torque: 11 Nm (115 kgf-cm, 9 ft. lbs.)
(d) Connect the connector.
2. INSTALL NO.1 AIR CLEANER HOSE
3. INSTALL AIR CLEANER ASSEMBLY WITH HOSE
Torque: 7.0 Nm (71 kgf-cm, 62 inch lbs.)