One-Way Clutch
ONE-WAY CLUTCHCOMPONENTS:
DISASSEMBLY
1. INSPECT NO. 2 1 WAY CLUTCH
2. DISCONNECT REAR PLANETARY GEAR ASSEMBLY
(a) Disconnect the No. 2 1 way clutch from the rear planetary gear assembly.
3. REMOVE 1 WAY CLUTCH OUTER RACE HOLE SNAP RING
(a) Using a screwdriver, remove the 1 way clutch outer race snap ring and retainers from the 1 way clutch outer race.
4. REMOVE NO. 2 1 WAY CLUTCH HOLE SNAP RING
(a) Using a screwdriver, remove the 2 No. 2 1 way clutch hole snap rings and retainers from the 1 way clutch outer race.
5. REMOVE NO. 2 1 WAY CLUTCH
(a) Remove the No. 2 1 way clutch from the 1 way clutch outer race.
INSPECTION
1. INSPECT NO. 2 1 WAY CLUTCH
(a) Hold the outer race and turn the hub. The hub should turn freely counterclockwise and should lock if turned clockwise.
REASSEMBLY
1. INSTALL NO. 2 1 WAY CLUTCH
(a) Install the No. 2 1 way clutch into the 1 way clutch outer race, facing the flange side of the No. 2 1 way clutch toward the shiny side of the 1 way clutch outer race.
2. INSTALL NO. 2 1 WAY CLUTCH HOLE SNAP RING
(a) Using a screwdriver, install the 2 No. 2 1 way clutch hole snap rings to the 1 way clutch outer race.
3. INSTALL 1 WAY CLUTCH OUTER RACE HOLE SNAP RING
(a) Using a screwdriver, install the No. 2 1 way clutch hole snap ring to the 1 way clutch outer race.
4. INSTALL REAR PLANETARY GEAR ASSEMBLY
(a) Install the rear planetary gear assembly in to the No. 2 1 way clutch, facing the inner race of the planetary gear toward the back side of the 1 way clutch outer race.
5. INSPECT NO. 2 1 WAY CLUTCH