Connecting Rod, Engine

Connecting Rod
Connecting rod thrust clearance
Standard 0.160 to 0.342 mm (0.0063 to 0.0135 inch)
Maximum 0.342 mm (0.0135 inch)
Connecting rod oil clearance
Standard 0.028 to 0.060 mm (0.0011 to 0.0024 inch)
Maximum 0.080 mm (0.0032 inch)
Connecting rod large end bore diameter
1 47.000 to 47.008 mm (1.8504 to 1.8507 inch)
2 47.009 to 47.016 mm (1.8507 to 1.8510 inch)
3 47.017 to 47.024 mm (1.8511 to 1.8513 inch)
Connecting rod small end bore diameter
A 20.012 to 20.015 mm (0.7879 to 0.7880 inch)
B 20.016 to 20.018 mm (0.7880 to 0.7881 inch)
C 20.019 to 20.021 mm (0.7881 to 0.7882 inch)
Piston pin x Connecting rod
Standard -0.001 to 0.017 mm (-0.00004 to 0.0007 inch)
Maximum 0.017 mm (0.0007 inch)
Out-of-alignment
Maximum 0.05 mm (0.0020 inch) per 100 mm (3.94 inch)
Twist
Maximum 0.05 mm (0.0020 inch) per 100 mm (3.94 inch)
Connecting rod bolt diameter
Standard 6.6 to 6.7 mm (0.260 to 0.264 inch)
Maximum 6.4 mm (0.252 inch)

Connecting rod cap x Connecting rod
1st 20 Nm (204 kgf-cm, 15 ft. lbs.)
2nd Turn 90°