Pinout Values and Diagnostic Parameters
TERMINALS OF ECUSKID CONTROL ECU (With VSC)
1. TERMINAL DESCRIPTION
2. TERMINAL INSPECTION
(a) Disconnect the connector and measure the voltage on the wire harness side.
HINT: Voltage can not be measured with the connector connected to the skid control ECU as the connector is water resistance.
SKID CONTROL ECU (without VSC):
3. TERMINAL DESCRIPTION
4. TERMINAL INSPECTION
(a) Disconnect the connector and measure the voltage on the wire harness side.
HINT: Voltage can not be measured with the connector connected to the skid control ECU as the connector is water resistance.
