Personal Light Assembly

INSPECTION

1. INSPECT PERSONAL LIGHT ASSEMBLY (w/ Sliding Roof)







a. Measure the resistance according to the value(s) in the table.
b. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, then check that the illumination comes on when switch operation is ON position.

2. INSPECT PERSONAL LIGHT ASSEMBLY (w/o Sliding Roof)







a. Measure the resistance according to the value(s) in the table.
b. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 6, then check that the illumination comes on when switch operation is ON position.