Overhaul

DISASSEMBLY

1. REMOVE COOLER DRYER




a. Using a socket hexagon wrench 14 mm (0.55 in.), remove the cap from the modulator.




b. Remove the O-ring from the cap.




c. Using pliers, remove the cooler dryer.

REASSEMBLY

1. INSTALL COOLER DRYER




a. Using pliers, install the cooler dryer.




b. Install a new O-ring to the cap.
c. Sufficiently apply compressor oil to the fit surfaces of the O-ring and the cap.

Compressor oil: ND-OIL 8 or equivalent




d. Using a socket hexagon wrench 14 mm (0.55 in.), install the cap to the modulator.

Torque: 2.9 N.m (29 kgf.cm, 25 in.lbf)