Cylinder Head

CYLINDER HEAD SUB-ASSEMBLY





Using several steps, uniformly install and tighten the 10 cylinder head set bolts and plate washers with a 10 mm bi-hexagon wrench in the order shown in the illustration.

Torque 70 Nm (714 kgf-cm, 52 ft-lbf)





Mark the front side of the cylinder head bolt with paint.
Retighten the cylinder head bolts 90° in the sequence shown in the illustration.
Check that the paint mark is now at a 90° angle to the front.

CYLINDER HEAD COVER SUB-ASSEMBLY





Install the cylinder head cover with the 8 bolts and 2 nuts.
Bolt A - Torque 11 Nm (112 kgf-cm, 8 ft-lbf)
Bolt B - Torque 14 Nm (143 kgf-cm, 10 ft-lbf)
Nut - Torque 11 Nm (112 kgf-cm, 8 ft-lbf)