Installation
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL INSTRUMENT PANEL WIRE ASSEMBLY
(a) Connect the 2 connectors.
(b) Install the clamp and the instrument panel wire assembly on the front passenger airbag assembly.
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.
2. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
(a) Engage the 10 hooks and install the front passenger airbag assembly on the instrument panel.
(b) Install the 2 screws.
3. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY Installation
4. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY
(a) Connect the connector.
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.
5. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH Installation
6. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side) Installation
7. INSTALL INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY Installation
8. INSTALL INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY Installation
9. INSTALL FRONT PILLAR GARNISH LH Installation
10. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side) Installation
11. INSTALL INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY Installation
12. INSTALL INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY Installation
13. INSTALL FRONT PILLAR GARNISH RH Installation
14. INSTALL NO. 1 CONSOLE BOX INSERT FRONT Installation
15. INSTALL NO. 2 CONSOLE BOX INSERT FRONT Installation
16. INSTALL CONSOLE BOX ASSEMBLY Installation
17. INSTALL CONSOLE BOX CARPET Installation
18. INSTALL CONSOLE BOX POCKET Installation
19. INSTALL RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/o Navigation System) Installation
20. INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/ Navigation System) Installation
21. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY Installation
22. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
23. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY Installation
24. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY Installation
25. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation
26. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation
27. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation
28. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
29. INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY Installation
30. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation
31. INSTALL FRONT DOOR SCUFF PLATE RH Installation
32. INSTALL COMBINATION METER ASSEMBLY Installation
33. INSTALL INSTRUMENT CLUSTER FINISH PANEL NO.1 Installation
34. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation
35. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY Installation
36. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY Installation
37. ADJUST SPIRAL CABLE Installation
38. INSTALL STEERING COLUMN COVER Installation
39. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH Installation
40. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation
41. INSTALL FRONT DOOR SCUFF PLATE LH Installation
42. INSTALL STEERING WHEEL ASSEMBLY Installation
43. INSTALL STEERING PAD Installation
44. INSTALL NO. 3 LOWER STEERING WHEEL COVER Installation
45. INSTALL NO. 2 LOWER STEERING WHEEL COVER Installation
46. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
47. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal.
48. INSPECT STEERING PAD Installation
49. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.