Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com
Home >> Toyota >> 2007 >> Camry L4-2.4L (2AZ-FXE) Hybrid >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Steering and Suspension >> Relays and Modules - Wheels and Tires >> Tire Pressure Module >> Service and Repair >> Removal >> From 03-2006 to 10-2006

From 03-2006 to 10-2006








TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL

REMOVAL

NOTICE: Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for re-registration of transmitter IDs Registration.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE RH Removal
3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Installation
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal
6. REMOVE TIRE PRESSURE WARNING ECU





(a) Remove the nut.
(b) Disconnect the connector and remove the tire pressure warning ECU.
pro multis · About Operation CHARM