Overhaul
DISASSEMBLY1. REMOVE AIR CONDITIONING PANEL SUB-ASSEMBLY
a. Remove the 5 screws.
b. Disengage the 4 claws and remove the air conditioning panel sub-assembly.
c. Disengage the 4 claws and remove the ornament.
2. REMOVE CONTROL KNOB SUB-ASSEMBLY
NOTE: When disassembling the air conditioning control assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
a. Disengage the 4 claws and remove the control panel case.
b. Remove the 5 screws and switch control sub-assembly.
c. Driver Side:
1. Disengage the 3 claws and pull the control knob sub-assembly to the position shown in the illustration.
2. Disengage the 3 claws and remove the control knob sub-assembly.
HINT: Remove the control knob sub-assembly and the dual push switch as a unit.
d. Passenger Side:
1. Disengage the 3 claws and remove the control knob sub-assembly.
REASSEMBLY
1. INSTALL CONTROL KNOB SUB-ASSEMBLY
NOTE: When disassembling the air conditioning control assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
a. Driver Side:
1. Engage the dual push switch with dial on the switch control sub-assembly.
2. Engage the 3 claws.
3. Engage the 3 claws and install the control knob sub-assembly.
b. Passenger Side:
1. Engage the 3 claws and install the control knob sub-assembly.
c. Install the switch control sub-assembly with the 5 screws.
d. Engage the 4 claws and install the control panel case.
2. INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY
a. Engage the 4 claws and install the ornament.
b. Engage the 4 claws.
c. Install the air conditioning panel sub-assembly with the 5 screws.