P0630 / INF804

DTC P0630-804 VIN not Programmed or Mismatch-ECM / PCM

DESCRIPTION

DTC Detection Condition:

DTC P0630 is set if the Vehicle Identification Number (VIN) is not stored in the hybrid vehicle control ECU or the input VIN is not accurate. Input the VIN with the intelligent tester.

Step 1-3:

Step 3(Continued):

INSPECTION PROCEDURE

CAUTION:
- Before inspecting the high-voltage system or disconnecting the low voltage connector of the inverter with converter assembly, take safety precautions such as wearing insulated gloves and removing the service plug grip to prevent electrical shocks. After removing the service plug grip, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.
- After disconnecting the service plug grip, wait for at least 10 minutes before touching any of the high-voltage connectors or terminals.

HINT: Waiting for at least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.