From 03-2006 to 10-2006

BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: 42, 45: Electronically Controlled Brake System Malfunction

DTC 42 - Electronically Controlled Brake System Malfunction

DTC 45 - Electronically Controlled Brake System Malfunction

DESCRIPTION

This DTC is output when the ABS and/or VSC system detects a malfunction in the brake control (Electronically Controlled Brake) system.






INSPECTION PROCEDURE

NOTICE: When replacing the skid control ECU, perform initialization of linear solenoid valve and calibration Initialization.

PROCEDURE

1. CHECK BRAKE CONTROL (ELECTRONICALLY CONTROLLED BRAKE) SYSTEM
(a) Clear the DTC DTC Check / Clear.
(b) Turn the power switch on (IG).
(c) Check if the same DTC is recorded DTC Check / Clear.
Result:






B -- REPAIR CIRCUIT INDICATED BY OUTPUT DTC
A -- Continue to next step.
2. RECONFIRM DTC
(a) Turn the power switch off.
(b) Clear the DTC DTC Check / Clear.
(c) Turn the power switch on (IG).
(d) Check if the same DTC is recorded DTC Check / Clear.
Result:






B -- REPLACE SKID CONTROL ECU
A -- CHECK FOR INTERMITTENT PROBLEMS (SYMPTOM SIMULATION)