Electronically Controlled Brake System
DTC C1345/66 Linear Solenoid Valve Offset Learning UndoneDESCRIPTION
DTC Detection Condition:
The skid control ECU stores and corrects the difference in each individual part such as the stroke sensor, actuator solenoids, and stroke simulator solenoid. Perform initialization of linear solenoid valve and calibration if these parts are replaced.
The skid control ECU receives shift position P signals from the HV control ECU through CAN communication system.
The DTCs are cancelled when the result of linear valve offset learning is normal.
Step 1-2:
Step 2(Continued)-3:
INSPECTION PROCEDURE
NOTE: When replacing the brake actuator assembly, perform initialization of linear solenoid valve and calibration. Initialization