Camshaft Position Sensor: Service and Repair

REMOVAL

1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
3. REMOVE CAMSHAFT POSITION SENSOR




a. Disconnect the camshaft position sensor connector.
b. Remove the bolt and camshaft position sensor.

INSTALLATION

1. INSTALL CAMSHAFT POSITION SENSOR




a. Apply a light coat of engine oil to the O-ring of the sensor.

NOTE: Make sure that the O-ring is not cracked or jammed when installing it.




b. Install the camshaft position sensor with the bolt.

Torque: 9.0 N.m (90 kgf.cm, 80 in.lbf)

c. Connect the camshaft position sensor connector.

2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
3. CHECK FOR ENGINE OIL LEAKS
4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY