Tire Pressure Monitor Receiver / Transponder: Service and Repair

TIRE PRESSURE WARNING RECEIVER (w/Antenna)

REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
3. REMOVE REAR SEAT HEADREST ASSEMBLY (for Fixed Seat Type)
4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY (for Fixed Seat Type)
5. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)
6. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)
7. REMOVE REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)
8. REMOVE REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type)
9. REMOVE REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type)
10. REMOVE REAR SEATBACK COVER (for Reclining Seat Type)
11. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY LH (for Reclining Seat Type)
12. REMOVE INNER ROOF SIDE GARNISH LH
13. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a) Remove the bolt.





(b) Disconnect the connector and remove the tire pressure warning receiver assembly.

INSTALLATION





1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a) Connect the connector to the tire pressure warning receiver assembly.
(b) Install the tire pressure warning receiver assembly with the bolt
Torque: 7.5 Nm (77 kgf-cm, 66 inch lbs.)

2. INSTALL INNER ROOF SIDE GARNISH LH
3. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type)
4. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY (for Fixed Seat Type)
5. INSTALL REAR SEAT HEADREST ASSEMBLY (for Fixed Seat Type)
6. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
7. INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)
8. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)
9. INSTALL REAR SEATBACK ASSEMBLY LH (for Reclining Seat Type)
10. INSTALL REAR SEATBACK COVER (for Reclining Seat Type)
11. INSTALL REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type)
12. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type)
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. INSPECT TIRE PRESSURE WARNING SYSTEM