Heated Oxygen Sensor

REMOVAL

REMOVE HEATED OXYGEN SENSOR




a. Disconnect the heated oxygen sensor connector.




b. Using SST, remove the heated oxygen sensor from the exhaust pipe assembly front No. 3.

SST 09224-00010

NOTE: Do not damage the heated oxygen sensor.

INSTALLATION

INSTALL HEATED OXYGEN SENSOR

a. Temporarily tighten the heated oxygen sensor.

NOTE: Do not damage the heated oxygen sensor.




b. Using SST, fully tighten the heated oxygen sensor.

SST 09224-00010

Torque: 44 N.m (449 kgf.cm, 32 ft.lbf)




c. Connect the heated oxygen sensor connector.