Ignition Coil: Service and Repair
REMOVAL1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE NO. 1 ENGINE COVER
3. REMOVE IGNITION COIL ASSEMBLY
a. Disconnect the 4 ignition coil connectors.
b. Remove the 4 bolts and 4 ignition coils.
INSTALLATION
1. INSTALL IGNITION COIL ASSEMBLY
a. Install the 4 ignition coils with the 4 bolts.
Torque: 9.0 N.m (92 kgf.cm, 80 in.lbf)
b. Connect the 4 ignition coil connectors.
2. INSTALL NO. 1 ENGINE COVER
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL