Accelerator Pedal: Service and Repair

REMOVAL

REMOVE ACCELERATOR PEDAL ROD




a. Disconnect the accelerator pedal position sensor connector.
b. Remove the 2 bolts and accelerator pedal rod.

INSTALLATION

INSTALL ACCELERATOR PEDAL ROD

NOTE:
- Avoid physical shock to the accelerator pedal assembly.
- Do not disassemble the accelerator pedal assembly.




a. Install the accelerator pedal rod with the 2 bolts.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

b. Connect the accelerator pedal position sensor connector.