Inspection

INSPECTION





1. INSPECT INTAKE MANIFOLD
(a) Using a precision straight edge and feeler gauge, measure the surface contacting the cylinder head for warpage.
Maximum warpage: 0.20 mm (0.0079 inch)
If the warpage is greater than maximum, replace the manifold.





2. INSPECT EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
(a) Using a precision straight edge and feeler gauge, measure the surface contacting the cylinder head for warpage.
Maximum warpage: 0.70 mm (0.0276 inch)
If the warpage is greater than the maximum, replace the manifold.