Coolant Temperature Sensor/Switch (For Computer): Service and Repair
REMOVAL1. DRAIN ENGINE COOLANT
2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
3. REMOVE AIR CLEANER INLET ASSEMBLY
4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY
6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
a. Disconnect the engine coolant temperature sensor connector.
b. Using SST, remove the engine coolant temperature sensor and gasket.
SST 09817-33190
INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
a. Install a new gasket onto the engine coolant temperature sensor.
b. Using SST, install the engine coolant temperature sensor.
SST 09817-33190
Torque: 20 N.m (204 kgf.cm, 15 ft.lbf)
c. Connect the engine coolant temperature sensor connector.
2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY
3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
4. INSTALL AIR CLEANER INLET ASSEMBLY
5. ADD ENGINE COOLANT
6 CHECK FOR ENGINE COOLANT LEAKS
7. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY