Brake Warning Light Remains ON
Brake Warning Light Remains ONDESCRIPTION
The skid control ECU is connected to the combination meter via CAN communication.
If any of the following is detected, the BRAKE warning light remains on:
- The skid control ECU connector is disconnected from the skid control ECU.
- The brake fluid level is insufficient.
- The parking brake is applied.
- EBD operation is not possible.
Wiring Diagram:
Step 1-4:
Step 4(continued)-6:
Step 7:
Step 8:
Step 9-10:
Step 10(continued):
INSPECTION PROCEDURE
NOTE: When replacing the brake actuator assembly, perform zero point calibration. Calibration