Canada - Interior - Shifter Trim Squeaking Noises

Bulletin
TSB2757

Issue Date
May 2, 2007

Market
Canada

Title
SHIFTER TRIM SQUEAK NOISE

Component
BODY COMPONENTS

Models
'07 CAMRY & CAMRY HV

INTRODUCTION:

Some 2007 model year Camry and Camry HV customers may complain of a squeak noise coming from the shifter trim area on automatic transmission equipped vehicles. Use the repair procedure below to correct this condition.

APPLICABLE VEHICLES:
- 2007 model year Camry and Camry HV vehicles.






PRODUCTION CHANGE INFORMATION:






PARTS INFORMATION:






REQUIRED SSTs:

NOTE:
Additional SSTs may be ordered by calling SPX/OTC at 1-800-933-8335.

WARRANTY INFORMATION:

FELT LOCATIONS:

The Shifter Trim has now been made available as an assembly in the parts system. The new assembly has felt pre-added to various locations to prevent noise.







NOTE:
The illustrations shows the modifications to the trim assembly to improve noise condition.

REPAIR PROCEDURE:

1. Order a NEW Shifter Trim Assembly (called "Housing Assembly, Position Indicator" in the parts system), using the part number from the Parts Information section of this TSB.
2. Remove and replace the old shifter trim assembly with the NEW part.
Refer to the Repair Manual within E-TAS / TIS library:
- Division: Toyota
- Model: Camry
- Year: 2007
- Service Category: Vehicle Interior
- Section: Interior Panels/Trim
- Keyword: Instrument Panel: Instrument Panel Safety Pad: Removal







A. Remove the shift lever knob sub-assembly by turning the shift lever counterclockwise.







B. Remove the No. 1 instrument finish panel garnish by disengaging the 2 clips (LH side).







C. Remove the No. 1 instrument finish panel garnish by disengaging the 2 clips (RH side).







D. Remove the floor shift position indicator housing sub-assembly by disengaging the 6 claws, and the 3 clips.

With Seat Heater System:
Disconnect the connector.

3. Replace the shifter trim assembly and reassemble in reverse order of disassembly.
4. Ensure the condition is no longer present.


NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.