P2010

DTC P2009 Intake Manifold Runner Control Circuit Low (Bank 1)
DTC P2010 Intake Manifold Runner Control Circuit High (Bank 1)

DESCRIPTION

DTC Detection Condition (Part 1):

DTC Detection Condition (Part 2):

Monitor Strategy:

Typical Enabling Conditions:

Typical Malfunction Thresholds:

Component Operating Range:

The Intake Manifold Runner Valve (IMRV) motor is driven by the ECM. The IMRV motor opens and closes the IMRV.

When the current of the IMRV motor deviates from the standard range, the ECM determines that there is a malfunction.

The related DTCs are P2004 and P2006, and P2014, P2016 and P2017.

NOTE: Do not disassemble the IMRV and the IMRV motor.

Wiring Diagram:

Step 1-3:

Step 3(continued):

INSPECTION PROCEDURE

HINT: Read freeze frame data using the intelligent tester. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.