Connecting Rod, Engine
Connecting RodConnecting rod out-of alignment
Maximum 0.05 mm (0.0020 in.) per 100 mm (3.94 in.)
Connecting rod twist
Maximum 0.15 mm (0.0059 in.) per 100 mm (3.94 in.)
Connecting rod bolt diameter
Standard 7.2 to 7.3 mm (0.283 to 0.287 in.)
Maximum 7.0 mm (0.276 in.)
Connecting rod thrust clearance
Standard 0.15 to 0.40 mm (0.0059 to 0.0157 in.)
Maximum 0.50 mm (0.020 in.)
Connecting rod oil clearance
Standard 0.045 to 0.067 mm (0.0018 to 0.0026 in.)
Maximum 0.070 mm (0.0028 in.)
Connecting rod cap x Connecting rod
1st 25 N*m (255 kgf/cm, 18 ft. lbs..)
2nd Turn 90°