Distance Sensor: Service and Repair

Laser Sensor:

LASER SENSOR

REMOVAL

1. REMOVE RADIATOR GRILL SUB-ASSEMBLY
2. REMOVE FRONT BUMPER ASSEMBLY
3. REMOVE FRONT BUMPER ENERGY ABSORBER
4. REMOVE FRONT BUMPER REINFORCEMENT
5. REMOVE LASER SENSOR




a. Disengage the clamp, then remove the laser sensor.

INSTALLATION

1. INSTALL LASER SENSOR




a. Install the laser sensor so that the claw contacts the flat surface around the hole on the front bumper mounting reinforcement.

NOTE: Do not insert the claw into the hole on the front bumper mounting reinforcement.

b. Engage the clamp.

2. INSTALL FRONT BUMPER REINFORCEMENT