Control Module HVAC: Service and Repair

Air Conditioning Amplifier:

Air Conditioning Amplifier:

AIR CONDITIONING AMPLIFIER

REMOVAL

HINT: Installation is in the reverse order of removal.

1. DISCONNECT BATTERY NEGATIVE TERMINAL
a. Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2
3. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH

4. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY




a. Disconnect the connector.
b. Remove the 2 screws and air conditioning amplifier assembly.

INSTALLATION

1. CONNECT BATTERY NEGATIVE TERMINAL

2. PERFORM SYSTEM INITIALIZE
a. Some systems need initialization when disconnecting the cable from the negative battery terminal.