Removal and Replacement

Rear Combination Light Assembly:

Rear Combination Light Assembly:

REAR COMBINATION LIGHT ASSEMBLY

REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- Installation is in the reverse order of removal.

1. REMOVE REAR FLOOR FINISH PLATE
2. REMOVE REAR BUMPER ASSEMBLY
3. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH




a. Disconnect the connector.
b. Remove the 3 nuts and the 2 bolts.
c. Remove the pin and the rear combination light assembly LH.

INSTALLATION

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
2. INSTALL REAR BUMPER ASSEMBLY
3. INSTALL REAR FLOOR FINISH PLATE