Center Mounted Brake Lamp: Service and Repair

High Mounted Stop Light Assembly:

HIGH MOUNTED STOP LIGHT ASSEMBLY

REMOVAL

HINT: installation is in the reverse order of removal.

1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE REAR SEAT CUSHION ASSEMBLY
3. REMOVE REAR SEAT HEADREST ASSEMBLY
4. REMOVE REAR SEAT BACK LOCK COVER CAP
5. REMOVE REAR SEATBACK ASSEMBLY LH
6. REMOVE REAR SEATBACK ASSEMBLY RH
7. REMOVE REAR DOOR SCUFF PLATE LH
8. REMOVE REAR DOOR SCUFF PLATE RH
9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
10. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
11. REMOVE REAR SEAT SIDE GARNISH LH
12. REMOVE REAR SEAT SIDE GARNISH RH
13. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH
14. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER RH
15. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
16. REMOVE CENTER STOP LIGHT ASSEMBLY

a. Disconnect the connector.
b. Disengage the claw and remove the center stop light assembly.

INSTALLATION

1. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
2. INSTALL REAR SEATBACK ASSEMBLY RH
3. INSTALL REAR SEATBACK ASSEMBLY LH
4. INSTALL REAR SEAT CUSHION ASSEMBLY
5. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH
6. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER RH
7. INSTALL REAR SEATBACK ASSEMBLY RH
8. INSTALL REAR SEATBACK ASSEMBLY LH
9. INSTALL REAR SEAT CUSHION ASSEMBLY
10. CONNECT BATTERY NEGATIVE TERMINAL
11. PERFORM INITIALIZATION
12. INSPECT SRS WARNING LIGHT