Removal and Replacement

Back-up Light Assembly:

BACK-UP LIGHT ASSEMBLY

REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- Installation is in the reverse order of removal.

1. REMOVE LUGGAGE COMPARTMENT DOOR COVER




a. Remove the 13 clips and the luggage compartment door cover.

2. REMOVE BACK-UP LIGHT ASSEMBLY




a. Disconnect the connector.
b. Remove the 3 nuts and the rear light assembly LH.

INSTALLATION

1. INSTALL BACK-UP LIGHT ASSEMBLY
2. INSTALL LUGGAGE COMPARTMENT DOOR COVER