Front Speed Sensor
REMOVAL1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER LINER LH
3. REMOVE FRONT SPEED SENSOR
a. Disconnect the speed sensor connector and clamp.
b. Remove the 2 bolts and separate the speed sensor harness from the body and shock absorber assembly.
c. Remove the clamp from the steering knuckle.
d. Remove the bolt and the front speed sensor.
NOTE:
- Prevent foreign matter from attaching to the sensor tip.
- Clean the installation hole and surface for the speed sensor every time the speed sensor is removed.
INSTALLATION
1. INSTALL FRONT SPEED SENSOR
a. Install the speed sensor front LH with the bolt.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
NOTE: Prevent foreign matter from attaching to the sensor tip.
b. Install the sensor harness brackets with the 2 bolts to the body and shock absorber assembly.
Torque:
Bolt A
5.0 N.m (51 kgf.cm, 44 in.lbf)
Bolt B
19 N.m (192 kgf.cm, 14 ft.lbf)
c. Connect the clamp to the steering knuckle.
NOTE: Do not twist the wire harness for speed sensor front LH when installing the speed sensor.
d. Connect the speed sensor connector and clamp.
2. INSTALL FRONT FENDER LINER LH
3. INSTALL FRONT WHEEL
Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)
4. CHECK ABS SPEED SENSOR SIGNAL
a. Check the ABS speed sensor signal without VSC, with VSC.