Rear Seat Assembly

REAR SEAT ASSEMBLY

Rear Seat Assembly:

Rear Seat Assembly:

Rear Seat Assembly:

REMOVAL

HINT: Only installation procedures requiring additional information are included.

1. REMOVE REAR SEAT CUSHION ASSEMBLY






a. Pull up the 2 portions of the rear seat cushion assembly as shown in the illustration and remove it.

A: 100 mm (3.94 in.) or less

NOTICE: In this case, hold the base of the clip up to prevent the cushion frame from being distorted.

b. Disconnect each wire of the reclining adjuster arm sub-assembly RH and remove the rear seat cushion assembly.

2. REMOVE REAR SEAT HEADREST ASSEMBLY
3. REMOVE REAR SEATBACK LOCK COVER CAP
a. Disengage the 6 claws and remove the 2 RR shelf cover caps.






4. REMOVE REAR SEATBACK ASSEMBLY LH






a. Remove the rear seat belt from the rear seat shoulder belt guide LH.






b. Remove the bolt, 2 nuts and the rear seatback assembly LH.

5. REMOVE REAR SEATBACK ASSEMBLY RH






a. Remove the rear seat belt from the rear seat shoulder belt guide RH.






b. Remove the rear seat belt from the rear seat shoulder belt guide center.






c. Remove the bolt, 2 nuts and the rear seatback assembly RH.

INSTALLATION

1. INSTALL REAR SEATBACK ASSEMBLY RH






a. Engage the rear seatback frame sub-assembly RH with the end of the reclining adjuster arm subassembly RH.
b. Install the rear seatback assembly RH with the bolt and 2 nuts.

Torque: 18 N.m (184 kgf.cm, 13 ft.lbf)

HINT: Compress completely adjuster arm sub-assembly before engage rear seatback frame sub-assembly.






c. Install the rear seat belt to the rear seat shoulder belt guide center.






d. Install the rear seat belt to the rear seat shoulder belt guide RH.

2. INSTALL REAR SEATBACK ASSEMBLY LH






a. Engage the rear seatback frame sub-assembly LH with the end of the reclining adjuster arm subassembly LH.
b. Install the rear seatback assembly LH with the bolt and 2 nuts.

Torque: 18 N.m (184 kgf.cm, 13 ft.lbf)

HINT: Compress completely adjuster arm sub-assembly before engage rear seatback frame sub-assembly.






c. Install the rear seat belt to the rear seat shoulder belt guide LH.