Front Seat Assembly (For Power Seat)

Front Seat Assembly (for Power Seat):

DISASSEMBLY

1. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
2. REMOVE SLIDE & VERTICAL POWER SEAT SWITCH KNOB

a. Using a screwdriver, remove the power seat switch knob.

HINT: Tape up the screwdriver tip before use.

3. REMOVE RECLINING POWER SEAT SWITCH KNOB

a. Using a screwdriver, remove the power seat switch knob.

HINT: Tape up the screwdriver tip before use.

4. REMOVE FRONT SEAT CUSHION SHIELD INNER NO. 1 LH

a. Disconnect the 2 clips and the cover.

b. Remove the 5 screws.
c. Driver seat only:
1. Disconnect the lumbar front power seat switch connector.

d. Disengage the 2 claws and remove the front seat cushion shield inner No. 1 LH and front seat cushion shield LH as a unit.

e. without Leg support adjustment system:

1. Remove the screw.
2. Disengage the 3 claws and remove the front seat cushion shield inner No. 1 LH.

f. with Leg support adjustment system:

1. Remove the screw.
2. Disengage the 3 claws and remove the front seat cushion shield inner No. 1 LH.

5. REMOVE LUMBAR FRONT POWER SEAT SWITCH

a. Remove the 2 screws and the lumbar front power seat switch.

6. REMOVE POWER SEAT SWITCH ASSEMBLY

a. Disengage the 2 clamps.
b. Remove the 2 screws and power seat switch assembly and seat wire as a unit.

c. Disconnect the connector and remove the power seat switch assembly.

7. REMOVE FRONT SEAT CUSHION SHIELD LH
8. REMOVE FRONT SEAT CUSHION SHIELD INNER LH

a. Remove the screw.
b. Disengage the 2 claws and clip and remove the front seat cushion shield inner LH.

9. REMOVE FRONT POWER SEAT SWITCH

a. Disconnect the connector.
b. Remove the 3 screws and the front power seat switch.

10. REMOVE FRONT POWER SEAT SWITCH

a. Disconnect the connector.
b. Remove the 3 screws and the position control ECU & switch assembly.

11. REMOVE SEAT CUSHION COVER WITH PAD
a. without Seat heater system:

1. Disengage the 2 clamps.

b. with Seat heater system:

1. Disconnect the connector.
2. Disengage the 3 clamps.

c. Disengage the hooks and remove the 2 clips and the seat cushion cover with pad.

12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

a. Remove the 11 hog rings and the separate type front seat cushion cover.

13. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH

a. Detach the 34 tack pins and remove the front seat cushion heater assembly LH.

14. REMOVE FRONT SEAT HEADREST ASSEMBLY
15. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH

a. Remove the 2 screws.
b. Disengage the 2 claws and remove the front seatback board sub-assembly LH.

16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a. Disengage the hooks and remove the separate type front seatback cover.

17. REMOVE FRONT SEAT HEADREST SUPPORT

a. Disengage the 2 claws and remove the front seat headrest support (LH side).

18. REMOVE FRONT SEAT HEADREST SUPPORT

HINT: Use the same procedures for the RH side and LH side.

19. REMOVE SEATBACK COVER WITH PAD

a. Disengage the 2 hog rings and the hooks.

b. Remove the 2 nuts and disconnect the separate type front seatback cover bracket.
c. Remove the seatback cover with pad.

20. REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a. Remove the 11 hog rings and the separate type front seatback cover.

21. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System)

a. Detach the 17 tack pins and remove the front seatback heater assembly LH.

22. REMOVE FRONT SEATBACK SHIELD RH

a. Remove the 2 screws and the front seatback shield RH.

23. REMOVE FRONT SEATBACK SHIELD LH

a. Disengage the clamp.
b. Remove the 2 screws and the front seatback shield LH.

24. REMOVE RECLINING ADJUSTER INSIDE COVER RH

a. Remove the screw and the reclining adjuster inside cover RH.

25. REMOVE RECLINING ADJUSTER INSIDE COVER LH

HINT: Use the same procedures for the RH side and LH side.

26. REMOVE FRONT SEAT CUSHION SHIELD LOWER LH (for Driver Seat)

a. Remove the screw and the front seat cushion shield lower LH.

27. REMOVE VERTICAL ADJUSTER BRACKET COVER LH (for Front Passenger Seat)

a. Disengage the 2 claws and remove the vertical adjuster bracket cover LH.

28. REMOVE FRONT SEAT CUSHION SHIELD LOWER (for Driver Seat)

HINT: Use the same procedures for the RH side and LH side.

29. REMOVE VERTICAL ADJUSTER BRACKET COVER OUTER (for Front Passenger Seat)

HINT: Use the same procedures for the RH side and LH side.

30. REMOVE SEAT CLIMATE CONTROL BLOWER RH (w/ Climate Control Seat System)

a. Disconnect the connector.
b. Disengage the 2 clamps.
c. Using a torx socket wrench (T20), remove the 6 screws, seat climate control blower RH and seatback climate control cover.

31. REMOVE SEATBACK CLIMATE CONTROL COVER RH (w/ Climate Control Seat System)
32. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for Driver Seat)

a. Remove the 4 springs and the seatback spring.

b. Disconnect the connector.
c. Remove the 2 screws and the lumbar support adjuster assembly LH.

33. REMOVE SEAT CUSHION CLIMATE CONTROL DUCT RH (w/ Climate Control Seat System)

a. Disengage the 6 claws and remove the seat cushion climate control duct.

34. REMOVE SEAT CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)

a. Disconnect the connector.
b. Using a torx socket wrench (T20), remove the screw and the seat climate control blower RH.

35. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY LH (w/ Seat Heater System)

a. Disconnect the connector.
b. Disengage the claw and clamp and remove the seat heater control sub-assembly LH.

36. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR (for Driver Seat)
37. REMOVE SEAT POSITION AIRBAG SENSOR (for Driver Seat)
38. REMOVE OCCUPANT CLASSIFICATION ECU (for Front Passenger Seat)
39. REMOVE FRONT SEAT WIRE LH

REASSEMBLY

1. INSTALL OCCUPANT CLASSIFICATION ECU (for Front Passenger Seat)
2. INSTALL SEAT POSITION AIRBAG SENSOR (for Driver Seat)
3. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System)
a. Set the front seat back heater assembly LH to the separate type front seatback cover.
b. Install the front seat back heater assembly LH with 17 new tack pins.

NOTICE: Do not substitute other metal parts for tack pins.

4. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

a. Using hog ring pliers, install the separate type front seatback cover with 11 new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

5. INSTALL SEATBACK COVER WITH PAD

a. Install the seatback cover with pad.
b. Install the separate type front seatback cover bracket with the 2 nuts.

Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)

c. Using hog ring pliers, install the separate type front seatback cover with 2 new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

d. Engage the hooks.

6. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)
a. Set the front seat cushion heater assembly LH to the separate type front seat cushion cover.
b. Install the front seat cushion heater assembly LH with 34 new tack pins.

NOTICE: Do not substitute other metal parts for tack pins.

7. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

a. Using hog ring pliers, install the separate type front seat cushion cover with 11 new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

8. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH