Mute Signal Circuit Between Radio Receiver and Tape Player
Mute Signal Circuit between Radio Receiver and Tape PlayerDESCRIPTION
This circuit sends a signal to the tape player to mute noise. Because of that, the noise produced by changing the sound source ceases.
If there is an open in the circuit, noise can be heard from the speakers when changing the sound source.
If there is a short in the circuit, even though the tape player is normal, no sound, or only an extremely small sound, can be produced.
Wiring Diagram:
INSPECTION PROCEDURE
Step 1:
Step 1:
Step 2(Continued)-3:
