Exhaust Manifold

Exhaust Manifold






INSTALL EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY NO.2
a. Instal I a new gasket and the converter with the 7 nuts. Uniformly, tighten the 7 nuts in the sequence shown in the illustration.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
b. Retighten nuts 1 and 2 as shown in the illustration.






INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH
a. Instal I a new gasket and the converter with the 6 nuts. Uniformly, tighten the 6 nuts in the sequence shown in the illustration.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
b. Retighten nuts 1 and 2 as shown in the illustration.