Curtain Shield Airbag Assembly

ON-VEHICLE INSPECTION

CAUTION: Be sure to perform the initialization of the occupant classification ECU if any of the following conditions occur. If the initialization is not performed, the SRS may not operate properly.

- The occupant classification ECU is replaced.
- Accessories (seatback tray or seat cover, etc.) are installed to the vehicle.
- The passenger seat is removed from the vehicle.
- Both the SRS warning light and passenger airbag ON/ OFF indicator light ("OFF") come on.
- The vehicle is brought to the workshop for repair due to an accident or collision.

HINT: The curtain shield airbag assembly and airbag sensor rear are mounted in the coupe model only.




1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check.
b. With the curtain shield airbag assembly installed on the vehicle, perform a visual check including the following: Cuts, minute cracks or marked discoloration on the front pillar garnish or roof headlining assembly around the curtain shield airbag assembly.




2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)

a. Perform a diagnostic system check.
b. With the curtain shield airbag assembly removed from the vehicle, perform a visual check including the following:
- Cuts, minute cracks or marked discoloration on the curtain shield airbag assembly.
- Cracks or other damage to the wire harness or connector.