Inspection

INSPECTION

1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY







a. Measure the resistance according to the value(s) in the table.
b. Connect the positive (+) lead from the battery to terminal 8 and the negative (-) lead to terminal 9, then check that the illumination comes on.

OK:
Illumination comes on.

2. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY







a. Check the courtesy light switch.
1. Measure the resistance according to the value(s) in the table.

3. INSPECT FRONT DOOR W/MOTOR LOCK ASSEMBLY LH







a. Measure the resistance according to the value(s) in the table.

4. INSPECT FRONT DOOR W/MOTOR LOCK ASSEMBLY RH







a. Measure the resistance according to the value(s) in the table.